Ningbo Yongshen Electric Appliance Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Jun Qin
  • Company Name : Ningbo Yongshen Electric Appliance Co., Ltd.
  • Tel : 86-574-88396518
  • Fax : 86-574-88396558
  • Address : Zhejiang,Ningbo,Lianxin Industrial Park, East Songjiang Road, Yinzhou Central Zone, Ningbo City
  • Country/Region : China
  • Zip : 315000

05-0860 Replace Gas Pilot Assembly

05-0860 Replace Gas Pilot Assembly
Product Detailed
Related Categories:Gas Water Heater Parts
Top quality and reasonable price Pilot Burner 1. safety device for appliance 2. pilot burner 3.Oxygen depletion sensor

Gas Pilot Assembly

     -Thermostat Control Valve

Universal thermocouple be 9 inches.

Combustion tube be 1/4''

INETRUCTIONS FOR GAS PILOT ASSEMBLY

1.To Remove:

1.SHUT OFF GAS SUPPLY and trun gas thermostat control valve to OFF position.

2.Remove air shutter screw and slide air shutter to the right.

3.Remove main burner screw.

4.Unscrew thermocouple lead.

5.Unscrew pilot gas line.

6.Remove burner and pilot assembly from water heater.

    Pilot assembly can now be separated from main burner by removing screw.

2.To Stall

1.Attach pilot assmebly to main burner with screw,tighten securely. Pilot flame spreader should be approx.1/8'' from end and side of main burner.

2.Install assembly onto combustion tube with screw;tighten securely.

3.Secure thermocouple lead to control. This is a flexible tube and can be bent to fit. CAUTION: Do not ben this lead withing 1/2'' of either end.   Tighten finger-tight plus 1/4'' trun with wrench.

4.Firmly tighten pilot gas line to control.

5.Position air shutter and insert screw.

6.TRUN ON GAS SUPPLY and trun control to pilot position ( push button if applicable)

7.NOTE: Check all connections for leaks using gas leak detector prior to using equipment.

8.Adjust main burner per instrustions.

05-0860 Replace Gas Pilot Assembly



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.